Login Form






Lost Password?
No account yet? Register
Home arrow How2Do Category arrow LifeStyles arrow How to apply stickers on surface

Related Links

How to apply stickers on surface PDF Print
User Rating: / 1
PoorBest 
Written by How2Do   
Tuesday, 24 July 2007

Step 1:

Clean surface and remove any dirt, oils before attaching decal. Place decal on a hard smooth surface (front side of decal facing up). Tape and secure the top of decal to surface. DO NOT remove clear transfer tape.

Step 2:

Using a credit card squeegee (burnish) the entire decal surface. Apply medium pressure to burnish decal surface. DO NOT remove clear transfer tape.

Step 3:

Apply a strip of masking tape to the top of the decal. Position the masking tape half way on the clear transfer tape and half off. The masking tape that is off the transfer tape will be used to secure and position the decal on your window.

Step 4:

Attach and secure masking tape and decal to window for placement.

Step 5:

Using a credit card, evenly squeegee the decal from the top pushing the decal down to the surface moving from right to left. This is to make sure that the decal will stick to the clear transfer tape.

Step 6:

Carefully peel off the bottom corner of the clear transfer tape and hold down the blue backing. (IMPORTANT: Make sure the entire white decal is attached to the clear transfer tape. If the decal is not attached to the clear transfer tape gently push it back onto the blue backing and re squeegee with medium pressure, only the area that is not adhering to the clear transfer tape and try lifting again.)

*Discard blue backing.

Step 7:

Squeegee the entire decal surface to the window to allow proper adhesion to surface. Start from the top of the decal design and evenly squeegee in a downward motion from left to right all the way to the bottom of the decal.

 

Step 8:

 Carefully peel back the clear transfer tape, pulling down at a 45 degree angle. The decal should adhere to the window. If the decal adheres to the clear transfer tape replace the decal back on the surface and squeegee the edges of the decal again. Repeat if necessary

All Pau! (Finish)

Tip : To remove any air bubbles under the decals after you have applied the decal to your window, use a sewing needle, puncture the bubble and gently push the air bubble towards the hole with your finger

Only registered users can write comments.
Please login or register.


Add as favourites (1) | Quote this article on your site | Views: 2738

Be first to comment this article
RSS comments

Powered by AkoComment Tweaked Special Edition v.1.4.6
AkoComment © Copyright 2004 by Arthur Konze - www.mamboportal.com
All right reserved

 
< Prev   Next >






MFactor - Online Business Management

CarMania - Collection of Popular Info

Prepaid4U - Perniagaan Di Hujung Jari

Forum Prepaid4U - MyMode Agents Discussion Board

Speedfinger Portal - Portal Infotaintment Remaja Malaysia

How2Do - Collection of Popular Tutorials

Malaysia Popular Info

Prepaid4U Statistic Site

MyMode Tutorials & Mobile One Stop Center

Subscribe NewsLetter






Latest comments

How To Make A Search In Forum
saya nak tanya....saya edit profile dalam mobile lounge mymo...
28/10/08 13:01 More...
By athirah

How to use Prepaid4u Forum
hello geng,gua baru nak kenal business ni,jd gua nak tau mac...
24/09/08 00:57 More...
By subizuray

How to use Prepaid4u Forum
boleh x tukar userID tk mymode nie?
08/09/08 12:15 More...
By pieeanis

How to use Prepaid4u Forum
hai, sy newbie jadi masih agak keliru. buat masa skrg sy in...
16/08/08 16:10 More...
By kafadz

How to use Prepaid4u Forum
aku nak carik downline 4 orang cukuplah,,,,,,,,
29/07/08 14:52 More...
By zack82

Polls

Most read How2Do articles section